DVB-S2 Demodulator: Maximum features and utilization of satellite bandwidth at a Minimal Cost SR1 and SR1 Pro
SR1 – DVB-S2 DEMODULATOR
Ayecka SR1 is advanced DVB-S2 Demodulator with 240Mbps over a GigE inter face, an IP-over-satellite receiver that gives service providers a strong competitive edge. SR1’s best cost-performance parameters lead the market. With its support of advanced modulation modes at 16 and 32 APSK, SR1 delivers more performance at lower cost and significantly reduces long-term operating costs.
SR1’s best cost-performance parameters currently lead the market. With its support of advanced modulation modes at 16 and 32 APSK, ACM, VCM, and Pre-distortion Feedback Channel. SR1 delivers more throughput over the available bandwidth. EUMETCAST, NOAAPORT, MVDDS, IP/SAT and VIDEO/IP/SAT approved, SR1 significantly reduces long-term operating costs.
Satellite service providers can leverage Ayecka SR1 demodulators across multiple applications, including bandwidth augmentation for VSAT networks, satellite unidirectional networks, data-casting, IPTV, and digital TV head-ends.
The use of DVB-S2 technology significantly improves the performance of IP over satellite networks. Ayecka’s SR1 leverages DVB-S2’s advanced features by increasing both the channel capacity and the efficiency of existing transponders to deliver higher bit rate.
Ayecka offers SR1-MPE, SR1-GSE and SR1Pro (that support both)
PRODUCT HIGHLIGHTS
- Cost-effective solution for IP over DVB-S2 reception
- Full support of DVB-S2
- VCM and ACM
- MODCOD: QPSK ¼ to 32 APSK 9/10
- 100ksps to 67.5Msps / over 240Mbps reception and processing capabilities (SR1 Pro)
- Support MPE and GSE*
- Dual carrier receiver
- Hardware Accelerator
- L2 transparent device
- Jumbo Frame Support
MAIN APPLICATIONS
- SCPC IP connectivity over satellite
- MCPC Satellite receivers
- Data Casting – Eumetcast and Nooaport
- MVDDS – Terrestrial Ku links
| SR1-Pro and SR1 Features | |
|---|---|
| De-GSE Filters SR1Pro SR1 |
8 2 |
| Maximum Symbol rate SR1Pro SR1 |
67.5 45 |
| Minimum Symbol rate SR1Pro SR1 |
0.101 1 |
| Real time Signal quality indications over UDP SR1Pro SR1 |
V X |
| BBF over UDP according to ESA L.3 protocol SR1Pro SR1 |
V X |
| Jumbo Frames SR1Pro SR1 |
10K X |
| Support of L2 and VLAN SR1Pro SR1 |
V X |
| Recommanded for new designs SR1Pro SR1 |
V X |
ORDER INFORMATION:
SR1 MPE – AY020
SR1 GSE – AY021
SR1 Pro – AY030 (GSE & MPE )
SR1 Controller – Java application to Monitor and Configure SR1 – Contact us for more information
There are no reviews yet.